 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| -VIN (4) 1.90 (48.26) ELECTRONIC COMPONENTS HIGH SIGNAL HERE DISABLE OUTPUT -VIN (4) TRIM (7) S E R I E S -SENSE (6) 132-200 WATT 4:1 INPUT RANGE DC-DC CONVERTERS External Output Trim OUTPUT SPECIFICATIONS: Voltage Accuracy.................................................................1.5% max Transient Response: 25% Step Load Change.....................<500u sec. External Trim Adj. Range6.......................... .................................10% Ripple & Noise3, 20MHz BW 3.3V & 5V............................40mV RMS, max. 100mV pk-pk, max. 12V & 15V...........................60mV RMS, max. 150mV pk-pk, max. 24V....................................100mV RMS, max. 240mV pk-pk, max. Temperature Coefficient.......................................................0.03%/C Short Circuit Protection.......................................................Continuous Line Regulation1 ...............................................................0.2% max. Load Regulation2...............................................................0.2% max. Over Voltage Protection Trip Range, % Vo nom..................115-140% Current Limit...........................................110-150% Nominal Output +SENSE (8) TRIM UP TRIM (7) TRIM DOWN -SENSE (6) -SENSE (6) TRIM (7) 10K ohms TRIMPOT +SENSE (8) NOTE: 1. Measured From High Line to low Line 2. Measured From Full Load to Zero Load 3. Output Ripple and Noise measured with 10uF tantalum and 1uF Ceramic capacitor across output 4. Logic Compatibility......................................Open Collector ref to-lnput Module ON ............................>3.5Vdc to 75Vdc or Open Circuit Module OFF ...........................<1.2Vdc 5. Suffix "N" to the model Number with Negative Logic Remote ON/OFF Module ON ............................<1.2Vdc Module OFF ...........................>3.5Vdc to 75Vdc or Open Circuit 6. Trim-up.................Connect a Resistor Between the Trim Pin and+Sense Trim-Down.............Connect a Resistor Between the Trim Pin and-Sense Features * * * * * * 132-200W Isolated Output Half Brick Package 4 : 1 Input Range Regulated Outputs Efficiency to 89% Input Under Voltage Protection * * * * * * Monotonic Start Up Over Current / Voltage Protection Over Temperature Protection Remote On/Off Control 1500VDC Isolation Continuous Short Circuit Protection GENERAL SPECIFICATIONS: Efficiency................................................................................... See Table Isolation Voltage .................Input/Output..................1500VDC min. Input/Case.....................1500VDC min. Output/Case..................1500VDC min. Isolation Resistance ..................................................................10 7 Ohms Switching Frequency .............................................................250KHz typ. Operating Case Temperature.......................................-40C to +100C Storage Temperature .....................................................-55C to +105C Thermal Shutdown, Case Temp..............................................110C Typ. Dimensions ............................................................2.28x2.4x0.52inches (57.9x61.0x13.2 mm) Case Material...........................Aluminum Baseplate with Plastic Case PIN CONNECTION Pin Function 1 2 3 4 5 6 7 8 9 +V Input ON/OFF CASE -V Input -V Output -Sense Trim +Sense +Vout CASE HB All Dimensions In Inches(mm) Tolerance Inches: x.xx= 0.02, x.xxx= 0.010 Millimeters: x.x= 0.5, x.xx= 0.25 MODEL NUMBER CHB200W-48S3V3 INPUT VOLTAGE 18-75 VDC OUTPUT VOLTAGE 3.3 VDC OUTPUT CURRENT MIN. 0mA MAX. 40 A NO LOAD 80mA INPUT CURRENT FULL LOAD 3125mA % EFF. 88 SIZE Half-Brick CHB200W-48S05 18-75 VDC 5.0 VDC 0mA 40 A 80mA 4682mA 89 Half-Brick CHB200W-48S12 18-75 VDC 12 VDC 0mA 16.7 A 60mA 4744mA 88 Half-Brick CHB200W-48S15 18-75 VDC 15 VDC 0mA 13.3 A 60mA 4723mA 88 Half-Brick CHB200W-48S24 18-75 VDC 24 VDC 0mA 8.3 A 60mA 4716mA 88 Half-Brick NOTE : 1. Nominal Input Voltage 48 VDC All Specifications Typical At Nominal Line, Full Load and 25C Unless Otherwise Noted. CHB200W CHB200W RSG RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany Tel. +49 69 984047-0 Fax +49 69 984047-77 info@rsg-electronic.de www.rsg-electronic.de 2.28 (57.90) 0.5 (12. SIDE Anderungen vorbehalten / subject to change without notice Specifications INPUT SPECIFICATIONS: Input Voltage Range.............................. 48Vin ............................... 18-75V Under Voltage Lockout.........48Vin power up...............................17 typ. 48Vin Power down................................16 typ. Postive Logic Remote on/off ( See Note 4 & 5) Input Filter................................................................................PI type. Remote On/Off Control ON/OFF (2) +SENSE (8) TRIM DOW TRIM U |
Price & Availability of CHB200W
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |